Skip to ContentSkip to Navigation
Research Zernike (ZIAM) News

Double layer of graphene helps to control spin currents

New type of transistor one step closer
17 October 2019
Simple science summary
Electrons have a negative charge, but they also behave like tiny magnets. This property of electrons, called spin, can be used to transport or store information in electronic circuits. Scientists are looking for ways to create such spin-based electronics, as this is probably more energy efficient than normal electronics. University of Groningen physicist Siddhartha Omar discovered a way to transport spins over long enough distances to make such devices feasible. Furthermore, the material he used enabled him to control these spin currents.

In order to make transistors that operate using the spin of electrons, rather than their charge, it is necessary to find a way of switching spin currents on and off. Furthermore, the lifetime of the spins should at least be equal to the time taken for these electrons to travel through a circuit. University of Groningen scientists have now taken an important step forward by creating a device that meets both of these requirements, based on a double layer of graphene on top of a layer of tungsten disulfide. Their results have been published on October in the journal Physics Review B.

Graphene, a two-dimensional form of carbon, is an excellent conductor of electron spins. However, it is difficult to manipulate spin currents in this material. Spin is a quantum mechanical property of electrons, which makes them behave like tiny magnets. The Physics of Nanodevices group at the University of Groningen, led by Professor Bart van Wees, is working on this problem. They have previously shown that it is possible to control spin currents if the graphene is placed on top of a layer of tungsten disulfide (another 2D material).

Siddharta Omar | Photo Science LinX
Siddharta Omar | Photo Science LinX

Double layer

‘However, this approach reduces the lifetime of the spins’, explains Siddhartha Omar, a postdoc in the Van Wees group. Tungsten is a metal, and its atoms influence the electrons passing through the graphene, dissipating the spin currents. This led Omar to use a double layer of graphene on the tungsten disulfide, based on the theory that electrons passing through the upper layer should ‘feel’ less of the metal atoms’ influence.

Omar also used another new technique, in which two different types of spin current are passed through the graphene. Spin is a magnetic moment that has a given direction. In normal materials, the spins are not aligned. However, the magnetic moment of spin currents – like that of magnets – has a preferential alignment. Relative to the material through which the electrons are passing, their spins can either have an in-plane orientation or an out-of-plane orientation.

Energy level

‘We found that, as the electrons pass through the outer graphene layer, the in-plane spins are dissipated very quickly – in mere picoseconds. However, the lifetime of the out-of-plane spins is about one hundred times longer.’ This means that, even in the presence of tungsten disulfide, one component of spin currents (spins with an out-of-plane orientation) can travel far enough to be used in devices such as transistors.

The multi-layered device. WS2: tungsten disulfide, hBN: boron nitride layer | Photo Siddhartha Omar / University of Groningen
The multi-layered device. WS2: tungsten disulfide, hBN: boron nitride layer | Photo Siddhartha Omar / University of Groningen

The energy level of the spin currents observed by Omar caused them to pass through the upper layer of graphene. This energy level can be boosted by applying an electric field, pushing the spin currents into the lower layer. ‘Down there, the spins will feel the full effect of the metal atoms and the spin currents will quickly dissipate’, Omar explains. This ability to switch the spin current off using an electric field is important, as it could be used to ‘gate’ transistors based on this technology.

‘Unfortunately, certain technical limitations of the substrate on which we built these devices prevent us from creating electric fields that are strong enough to produce this gating effect’, says Omar. ‘However, we have shown that it is possible to send spin currents through a heterostructure made of graphene and tungsten disulfide. That is an important step towards the creation of a spin transistor.’

Reference: S. Omar, B.N. Madhushankar, and B. J. van Wees: Large spin-relaxation anisotropy in bilayer-graphene/WS2 heterostructures. Phys. Rev. B 100, 16 October 2019.

This article was originally published on ScienceLinX

Last modified:25 October 2019 09.58 a.m.
printView this page in: Nederlands

More news

  • 06 April 2020

    Five percent increase in municipal residential taxes for home owners

    Households that own their own home paid 776 euros to the municipality on average this year, which is 5.0 percent more than last year. 295 euros of this amount covers the immovable property tax (ozb), 283 euros are paid for waste collection levy, and...

  • 31 March 2020

    Three UG top researchers receive ERC Advanced Grant

    Three researchers from the University of Groningen have been awarded an ERC Advanced Grant. These three researchers are Prof. Gerard Roelfes (Stratingh Institute for Chemistry), Prof. Leon Koopmans (Kapteyn Astronomical Institute) and Prof. Erwin de...

  • 31 March 2020

    In Science podcast: Q&A with Cisca Wijmenga

    In this special 16th episode of our In Science podcast, our guest is rector magnificus Cisca Wijmenga. She tries to answer some of the questions from staff and students about the corona crisis. The rector, Wim, Tina and Arjen discuss the impact of the...