Skip to ContentSkip to Navigation
Research Zernike (ZIAM) MK De Hosson Group

Publications

2021

Cao, H., Wen, F., Kumar, S., Rudolf, P., De Hosson, J. T. M., & Pei, Y. (2021). Corrigendum to “On the S/W stoichiometry and triboperformance of WSxC(H) coatings deposited by magnetron sputtering” [Surface and Coatings Technology 365 (2019) 41-51]. Surface and Coatings Technology, 423, [127595]. https://doi.org/10.1016/j.surfcoat.2021.127595
Cao, H., Bai, M., Inkson, B. J., Zhong, X., De Hosson, J. T. M., Pei, Y., & Xiao, P. (2021). Self-healing WS2 tribofilms: An in-situ appraisal of mechanisms. Scripta Materialia, 204, [114124]. https://doi.org/10.1016/j.scriptamat.2021.114124
Cao, H., Momand, J., Syari'Ati, A., Wen, F., Rudolf, P., Xiao, P., De Hosson, J. T. M., & Pei, Y. (2021). Temperature-Adaptive Ultralubricity of a WS2/a-C Nanocomposite Coating: Performance from Room Temperature up to 500 °c. ACS Applied Materials and Interfaces, 13(24), 28843-28854. https://doi.org/10.1021/acsami.1c06061

2020

Akbar, S., Hasanain, S. K., Ivashenko, O., Dutka, M. V., Ali, N. Z., Blake, G. R., De Hosson, J. T. M., & Rudolf, P. (2020). Defect ferromagnetism induced by lower valence cation doping: Li-doped SnO(2)nanoparticles. RSC Advances, 10(44), 26342-26348. https://doi.org/10.1039/d0ra03644g
Zijlstra, G., Šamořil, T., Tesařová, H., Ocelík, V., & De Hosson, J. T. M. (2020). Depth Profile Analysis of Thin Oxide Layers on Polycrystalline Fe–Cr. Microscopy and Microanalysis, 26(1), 112-119. https://doi.org/10.1017/s1431927619015319
Basu, I., & De Hosson, J. T. M. (2020). High Entropy Alloys: Ready to Set Sail? Metals, 10(2), [194]. https://doi.org/10.3390/met10020194
Biswas, K., Yeh, J-W., Bhattacharjee, P. P., & DeHosson, J. T. M. (2020). High entropy alloys: Key issues under passionate debate. Scripta Materialia, 188, 54-58. https://doi.org/10.1016/j.scriptamat.2020.07.010
Fidder, H., Admiraal, J. P. J., Ocelík, V., & De Hosson, J. T. M. (2020). In Situ Digital Image Correlation Observations of Laser Forming. Metals, 10(1), [17]. https://doi.org/10.3390/met10010017
De Hosson, J. T. M., Ali, N., Fierro, G., Aliofkhazraei, M., & Chipara, M. (2020). Preface. Applied Surface Science, 504, [143664]. https://doi.org/10.1016/j.apsusc.2019.143664
Basu, I., & De Hosson, J. T. M. (2020). Strengthening mechanisms in high entropy alloys: Fundamental issues. Scripta Materialia, 187, 148-156. https://doi.org/10.1016/j.scriptamat.2020.06.019

2019

Cao, H., Wen, F., De Hosson, J. T. M., & Pei, Y. (2020). On the Self-Repair of WS2/a-C Tribocoating. Advanced Materials Interfaces, 7(1), [1900938]. https://doi.org/10.1002/admi.201900938
Ribas Gomes, D., Turkin, A., Vainchtein, D., & De Hosson, J. T. M. (2019). Bending of nanoporous thin films under ion radiation. Thin Solid Films, 688(SI), [137419]. https://doi.org/10.1016/j.tsf.2019.137419
Akbar, S., Hasanain, S. K., Ivashenko, O., Dutka, M. V., Akhtar, N., De Hosson, J. T. M., Ali, N. Z., & Rudolf, P. (2019). Defect ferromagnetism in SnO2: Zn2+ hierarchical nanostructures: correlation between structural, electronic and magnetic properties. RSC Advances, 9(7), 4082-4091. https://doi.org/10.1039/c9ra00455f
Farahani, H., Zijlstra, G., Mecozzi, M. G., Ocelík, V., De Hosson, J. T. M., & Van Der Zwaag, S. (2019). In Situ High-Temperature EBSD and 3D Phase Field Studies of the Austenite-Ferrite Transformation in a Medium Mn Steel. Microscopy and Microanalysis, 25(3), 639-655. https://doi.org/10.1017/S143192761900031X
Chabok, A., Galinmoghaddam, E., De Hosson, J. T. M., & Pei, Y. T. (2019). Micromechanical evaluation of DP1000-GI dual-phase high-strength steel resistance spot weld. Journal of Materials Science, 54(2), 1703-1715. https://doi.org/10.1007/s10853-018-2886-z
Sabooni, S., Galinmoghaddam, E., Ahmadi, M., Westerwaal, R. J., van de Langkruis, J., Zoestbergen, E., De Hosson, J. T. M., & Pei, Y. T. (2019). Microstructure and adhesion strength quantification of PVD bi-layered ZnMg-Zn coatings on DP800 steel. Surface and Coatings Technology, 359, 227-238. https://doi.org/10.1016/j.surfcoat.2018.12.064
Sabooni, S., Galinmoghaddam, E., Cao, H. T., Westerwaal, R. J., Zoestbergen, E., De Hosson, J. T. M., & Pei, Y. T. (2019). New insight into the loss of adhesion of ZnMg-Zn bi-layered coatings on steel substrates. Surface & Coatings Technology, 370, 35-43. https://doi.org/10.1016/j.surfcoat.2019.04.085
Gomes, D. R., Turkin, A. A., Vainchtein, D. I., & De Hosson, J. T. M. (2019). Size-dependent ion-induced densification of nanoporous gold. Scripta Materialia, 164, 17-20. https://doi.org/10.1016/j.scriptamat.2019.01.033

2018

Cao, H., Wen, F., Kumar, S., Rudolf, P., De Hosson, J. T. M., & Pei, Y. (2019). On the S/W stoichiometry and triboperformance of WSxC(H) coatings deposited by magnetron sputtering. Surface & Coatings Technology, 365, 41-51. https://doi.org/10.1016/j.surfcoat.2018.04.040
Lu, L., De Hosson, J. T. M., & Pei, Y. (2019). Three-dimensional micron-porous graphene foams for lightweight current collectors of lithium-sulfur batteries. Carbon, 144, 713-723. https://doi.org/10.1016/j.carbon.2018.12.103
Rao, J., Zhang, X., Ocelik, V., Vainchtein, D., De Hosson, J. T. M., Liou, S-C., & Chiou, W-A. (2018). A Novel Technique for In-Situ TEM Characterization of Precipitates in Alloys. Microscopy and Microanalysis, 24(S1), 12-13. https://doi.org/10.1017/S1431927618000557
Cai, D., Yang, Z., Yuan, J., Duan, X., Wang, S., Ocelik, V., De Hosson, J. TH. M., Jia, D., & Zhou, Y. (2018). Ablation behavior and mechanism of boron nitride - magnesium aluminum silicate ceramic composites in an oxyacetylene combustion flame. Ceramics International, 44(2), 1518-1525. https://doi.org/10.1016/j.ceramint.2017.10.063
Bergers, L. J. C., De Hosson, J. T. M., Geers, M. G. D., & Hoefnagels, J. P. M. (2018). Anomalous precipitation hardening in Al-(1 wt%)Cu thin films. Materials science and engineering a-Structural materials properties microstructure and processing, 722, 37-46. https://doi.org/10.1016/j.msea.2018.02.083
Basu, I., Ocelík, V., & De Hosson, J. T. M. (2018). BCC-FCC interfacial effects on plasticity and strengthening mechanisms in high entropy alloys. Acta Materialia, 157, 83-95. https://doi.org/10.1016/j.actamat.2018.07.031
Chabok, A., Van der Aa, E., De Hosson, J. T. M., & Pei, Y. (2018). Characterization of fracture toughness for different zones of resistance spot welded dual phase steel using micro-cantilever testing. In International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS: Processing, Fabrication, Properties, Applications
Hemmati, I., Ocelík, V., & De Hosson, J. T. M. (2018). Correlation between cladding speed, microstructure and hardness of laser-deposited steel coatings: The role of strengthening mechanism. In ICALEO 2014 Congress Proceedings https://doi.org/10.2351/1.5063089
Top, M., Mulder, G., Prager, N., Fahlteich, J., & De Hosson, J. T. M. (2018). Effect of humidity on the residual stress in silicon-containing plasma polymeric coatings. Surface & Coatings Technology, 347, 46-53. https://doi.org/10.1016/j.surfcoat.2018.04.066
Chabok, A., van der Aa, E., Basu, I., De Hosson, J., & Pei, Y. (2018). Effect of pulse scheme on the microstructural evolution, residual stress state and mechanical performance of resistance spot welded DP1000-GI steel. Science and technology of welding and joining, 23(8), 649-658. https://doi.org/10.1080/13621718.2018.1452875
Yang, H. J., Shao, X. H., Pei, Y. T., Zhang, Z. F., & De Hosson, J. T. M. (2018). Enhanced efficiency of self-healing of Cr2AlC. Materials Letters, 227, 51-54. https://doi.org/10.1016/j.matlet.2018.05.038
De Hosson, J. T. M. (2018). Gaining sight after being blind: A tribute to Jing Zhu. Ultramicroscopy, 192, 37-49. https://doi.org/10.1016/j.ultramic.2018.05.008
Cao, H. T., Dong, X. P., Chabok, A., Rao, J. C., De Hosson, J. T. M., & Pei, Y. T. (2018). Hard-yet-tough high-vanadium hierarchical composite coating: Microstructure and mechanical properties. Materials science and engineering a-Structural materials properties microstructure and processing, 736, 87-99. https://doi.org/10.1016/j.msea.2018.08.086
Cao, H., Wen, F., De Hosson, J. T. M., & Pei, Y. T. (2018). Instant WS2 platelets reorientation of self-adaptive WS2/a-C tribocoating. Materials Letters, 229(2018), 64-67. https://doi.org/10.1016/j.matlet.2018.06.111
Basu, I., Fidder, H., Ocelík, V., & De Hosson, J. T. M. (2018). Local stress states and microstructural damage response associated with deformation twins in hexagonal close packed metals. Crystals, 8(1), [1]. https://doi.org/10.3390/cryst8010001
Lu, L., Schriever, N., De Hosson, J. T. M., & Pei, Y. T. (2018). Low-temperature solid-state growth of three-dimensional bicontinuous nanoporous graphene with tunable porosity for lithium-sulfur batteries. Journal of Materials Chemistry A, 6(24), 11405-11415. https://doi.org/10.1039/C8TA03488E
Lu, L., De Hosson, J. T. M., & Pei, Y. (2018). Low-temperature synthesis of large-area graphene-based carbon films on Ni. Materials & design, 144, 245-255. https://doi.org/10.1016/j.matdes.2018.02.034
Ocelík, V., Oboňa, J. V., Skolski, J. Z. P., Römer, G-W. R. B. E., Veld, A. J. H. I. T., & De Hosson, J. T. M. (2018). Microstructural characterization of surface damage through ultra-short laser pulses. In ICALEO 2014 Congress Proceedings https://doi.org/10.2351/1.5063054
Shen, J., Van Rijn, F., Pei, Y. T., & De Hosson, J. T. M. (2018). On the abrasiveness and reinforcement of fillers in PTFE/epoxy composites. Polymer Composites, 39(3), 698-707. https://doi.org/10.1002/pc.23987
Gomes, D. R., Turkin, A. A., Vainchtein, D. I., & De Hosson, J. T. M. (2018). On the fabrication of micro- and nano-sized objects: The role of interstitial clusters. Journal of Materials Science, 53(10), 7822-7833. https://doi.org/10.1007/s10853-018-2067-0
Ribas Gomes, D., Turkin, A., Vainchtein, D., & De Hosson, J. T. M. (2018). On the mechanism of ion-induced bending of nanostructures. Applied Surface Science, 446(SI), 151-159. https://doi.org/10.1016/j.apsusc.2018.02.015
De Hosson, J. T. M., Ali, N., Fierro, G., Aliofkhazraei, M., & Chipara, M. (2018). Preface - 'NANOSMAT-Paris 2017'. Applied Surface Science, 446, 1-2. https://doi.org/10.1016/j.apsusc.2018.03.115
Groen, M., Zijlstra, G., San-Martin, D., Post, J., & De Hosson, J. T. M. (2018). Product shape change by internal stresses. Materials & design, 157, 492-500. https://doi.org/10.1016/j.matdes.2018.08.013
Fu, J., Detsi, E., & De Hosson, J. T. M. (2018). Recent advances in nanoporous materials for renewable energy resources conversion into fuels. Surface & Coatings Technology, 347, 320-336. https://doi.org/10.1016/j.surfcoat.2018.05.001
Fidder, H., Ocelík, V., Botes, A., & de Hosson, J. T. M. (2018). Response of Ti microstructure in mechanical and laser forming processes. Journal of Materials Science, 53(20), 14713-14728. https://doi.org/10.1007/s10853-018-2650-4
Cao, H., De Hosson, J. T. M., & Pei, Y. T. (2018). Self-healing of a pre-notched WS2/a-C coating. Materials Research Letters, 7(3), 103-109. https://doi.org/10.1080/21663831.2018.1561538
Basu, I., Ocelik, V., & De Hosson, J. T. M. (2018). Size dependent plasticity and damage response in multiphase body centered cubic high entropy alloys. Acta Materialia, 150, 104-116. https://doi.org/10.1016/j.actamat.2018.03.015
Basu, I., Ocelik, V., & De Hosson, J. T. M. (2018). Size effects on plasticity in high-entropy alloys. Journal of materials research, 33(19), 3055-3076. https://doi.org/10.1557/jmr.2018.282
Lu, L., Abeln, T., De Hosson, J. T. M., & Pei, Y. (2018). Solid-state growth of three-dimensional interconnected nanoporous graphene microspheres for lithium-sulfur batteries. Abstract from 29th International Conference on Diamond and Carbon Materials, Dubrovnik, Croatia.
Lu, L., Andela, P., De Hosson, J. T. M., & Pei, Y. T. (2018). Template-Free Synthesis of Nanoporous Nickel and Alloys as Binder- Free Current Collectors of Li Ion Batteries. ACS Applied Nano Materials, 1(5), 2206-2218. https://doi.org/10.1021/acsanm.8b00284
Lu, L., Andela, P., De Hosson, J. T. M., & Pei, Y. T. (2018). Template-Free Synthesis of Nanoporous Nickel and Alloys As Binder-Free Current Collectors for Batteries. 533. Poster session presented at THERMEC’2018, Paris, France.
Zijlstra, G., de Jeer, L., Ocelík, V., & De Hosson, J. T. M. (2018). The effect of surface texture on the oxidation behaviour of polycrystalline Fe-Cr. Applied Surface Science, 459, 459-467. https://doi.org/10.1016/j.apsusc.2018.08.036

2017

Huráková, M., Csach, K., Miškuf, J., Juríková, A., Ocelík, V., & De Hosson, J. T. M. (2017). Crack propagation in metallic glass ribbon as a function of the position of stress concentrators. In Metallography XVI (Vol. 891 MSF, pp. 494-499). (Materials Science Forum; Vol. 891 MSF). TRANS TECH PUBLICATIONS LTD. https://doi.org/10.4028/www.scientific.net/MSF.891.494
De Jeer, L. T. H., Ocelík, V., & De Hosson, J. T. M. (2017). Dynamics of tempering processes in stainless steel. In WIT Transactions on Engineering Sciences (Vol. 116, pp. 187-193). WIT Press. https://doi.org/10.2495/MC170191
Cao, H., de Hosson, J. T. M., & Pei, Y. T. (2017). Effect of carbon concentration and argon flow rate on the microstructure and triboperformance of magnetron sputtered WS2/a-C coatings. Surface and Coatings Technology, 332(2017), 142-152. https://doi.org/10.1016/j.surfcoat.2017.06.087
Cai, D., Jia, D., Yang, Z., Zhu, Q., Ocelik, V., Vainchtein, I. D., De Hosson, J. T. M., & Zhou, Y. (2017). Effect of magnesium aluminum silicate glass on the thermal shock resistance of BN matrix composite ceramics. Journal of the American Ceramic Society, 100(6), 2669-2678. https://doi.org/10.1111/jace.14795
Cao, H., De Hosson, J. T. M., & Pei, Y. T. (2017). Effects of carbon content and argon flow rate on the triboperformance of self-lubricating WS2/a-C sputtered coating. Abstract from 44th Int. Conference on Metallurgical Coatings and Thin Films, San Diego, United States.
Basu, I., Ocelík, V., & De Hosson, J. T. M. (2017). Experimental determination and theoretical analysis of local residual stress at grain scale. In WIT Transactions on Engineering Sciences (Vol. 116, pp. 3-14). WIT Press. https://doi.org/10.2495/MC170011
Top, M., Schoenfeld, S., Fahlteich, J., Bunk, S., Kuehnel, T., Straach, S., & De Hosson, J. T. (2017). Hollow-cathode activated PECVD for the high-rate deposition of permeation barrier films. Surface & Coatings Technology, 314(Special ussue), 155-159. https://doi.org/10.1016/j.surfcoat.2016.09.003
Huráková, M., Csach, K., Juríková, A., Miškuf, J., Demčák, Š., Ocelík, V., & De Hosson, J. T. M. (2017). Influence of loading rate on the mechanical performance of metallic glass. Journal of Non-Crystalline Solids, 470, 160-167. https://doi.org/10.1016/j.jnoncrysol.2017.05.023
Top, M., Fahlteich, J., & De Hosson, J. T. M. (2017). Influence of the applied power on the barrier performance of silicon-containing plasma polymer coatings using a hollow cathode-activated PECVD process. Plasma processes and polymers, 14(9), [1700016]. https://doi.org/10.1002/ppap.201700016
Cao, H., De Hosson, J. T. M., & Pei, Y. T. (2017). Influence of the target-substrate distance on the S-W stoichiometry and triboperformance of WSxC films deposited by PVD in reactive and non-reactive processes. Poster session presented at 14th International Conference on Plasma Based Ion Implantation & Deposition, Shanghai, China.
Zijlstra, G., van Daalen, M. S. B., Vainchtein, D. I., Ocelik, V., & de Hosson, J. T. M. (2017). Interphase boundary motion elucidated through in-situ high temperature electron back-scatter diffraction. Materials & design, 132, 138-147. https://doi.org/10.1016/j.matdes.2017.06.068
Palavra, A., Coelho, B. N., de Hosson, J. T. M., Lima, M. S. F., Carvalho, S. M., & Costa, A. R. (2017). Laser surface treatment for enhanced titanium to carbon fiber-reinforced polymer adhesion. Journal of the brazilian society of mechanical sciences and engineering, 39(8), 2917-2924. https://doi.org/10.1007/s40430-017-0826-5
Basu, I., Ocelík, V., & De Hosson, J. T. M. (2017). Measurement of spatial stress gradients near grain boundaries. Scripta Materialia, 136, 11-14. https://doi.org/10.1016/j.scriptamat.2017.03.036
Chabok, A., Van der Aa, E., de Hosson, J. T. M., & Pei, Y. T. (2017). Mechanical behavior and failure mechanism of resistance spot welded DP1000 dual phase steel. Materials & design, 124, 171-182. https://doi.org/10.1016/j.matdes.2017.03.070
Chabok, A., van der Aa, E., De Hosson, J., & Pei, Y. T. (2017). Microstructural evolution and mechanical performance of resistance spot welded DP1000 steel with single and double pulse welding. Poster session presented at 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, Brno, Czech Republic.
Fidder, H., Ocelik, V., & De Hosson, J. T. M. (2017). Microstructure transformation of Αlpha-titanium after mechanical and laser forming. In WIT Transactions on Engineering Sciences (Vol. 116, pp. 215-222). WIT Press. https://doi.org/10.2495/MC170221
Ocelik, V., Schepke, U., Rasoul, H. H., Cune, M. S., & De Hosson, J. T. M. (2017). On the bulk degradation of yttria-stabilized nanocrystalline zirconia dental implant abutments: an electron backscatter diffraction study. Journal of Materials Science : Materials in Medicine, 28(8), [121]. https://doi.org/10.1007/s10856-017-5927-2
Rao, J. C., Ocelík, V., Vainchtein, D., Tang, Z., Liaw, P. K., & De Hosson, J. T. M. (2017). On the onset of nano-ordered phase distributions in high-entropy alloys. Reviews on advanced materials science, 48(2), 105-111.
de Jeer, L., Ocelík, V., & De Hosson, J. T. M. (2017). Orientation Relationships in Al0.7CoCrFeNi High-Entropy Alloy. Microscopy and Microanalysis, 23(5), 905-915. https://doi.org/10.1017/S1431927617012442
De Hosson, J. T. M., Ali, N., Fierro, G., Aliofkhazraei, M., & Chipara, M. (2017). Preface. Applied Surface Science, 421(Part A), 1. https://doi.org/10.1016/j.apsusc.2017.06.001
Rao, J. C., Diao, H. Y., Ocelík, V., Vainchtein, D., Zhang, C., Kuo, C. C., Tang, Z., Guo, W., Poplawsky, J. D., Zhou, Y., Liaw, P. K., & De Hosson, J. T. M. (2017). Secondary phases in AlxCoCrFeNi high-entropy alloys: An in-situ TEM heating study and thermodynamic appraisal. Acta Materialia, 131, 206-220. https://doi.org/10.1016/j.actamat.2017.03.066
Csach, K., Huráková, M., Juríková, A., Miškuf, J., Ocelík, V., & De Hosson, J. T. M. (2017). Shear band morphology of indented region in Cu-based metallic glass. In Metallography XVI (pp. 500-503). (Materials Science Forum; Vol. 891 MSF). TRANS TECH PUBLICATIONS LTD. https://doi.org/10.4028/www.scientific.net/MSF.891.500
Liang, Z. Y., De Hosson, J. T. M., & Huang, M. X. (2017). Size effect on deformation twinning in face-centred cubic single crystals: Experiments and modelling. Acta Materialia, 129, 1-10. https://doi.org/10.1016/j.actamat.2017.02.063
Ocelík, V., Schepke, U., Rasoul, H. H., Cune, M. S., & De Hosson, J. T. M. (2017). Surface degradation of nanocrystalline zirconia dental implants. In WIT Transactions on Engineering Sciences (Vol. 116, pp. 355-365). WIT Press. https://doi.org/10.2495/MC170371
Nenadl, O., Ocelik, V., & De Hosson, J. T. M. (2017). Texture development in direct powder deposition. Journal of Laser Applications, 29(4), [042007]. https://doi.org/10.2351/1.5007944
Zijlstra, G., Faber, E., Ocelik, V., & de Hosson, J. T. M. (2017). THE GROWTH OF A PASSIVE FILM ON STEEL STUDIED WITH IN-SITU AFM. In Materials and contact characterisation VIII (pp. 23-29). (WIT Transactions on Engineering Sciences; Vol. 116). WIT Press.
Marashdeh, A., Tiesma, T., van Velzen, N. J. C., Harder, S., Havenith, R. W. A., De Hosson, J. T. M., & van Dorp, W. F. (2017). The rational design of a Au(I) precursor for focused electron beam induced deposition. Beilstein Journal of Nanotechnology, 8, 2753-2765. https://doi.org/10.3762/bjnano.8.274

2016

Nenadl, O., Kuipers, W., Koelewijn, N., Ocelík, V., & De Hosson, J. T. M. (2016). A versatile model for the prediction of complex geometry in 3D direct laser deposition. Surface and Coatings Technology, 307A, 292-300. https://doi.org/10.1016/j.surfcoat.2016.08.090
Ocelik, V., Janssen, N., Smith, S., & De Hosson, J. T. M. (2016). Additive Manufacturing of High-Entropy Alloys by Laser Processing. JOM, 68(7), 1810-1818. https://doi.org/10.1007/s11837-016-1888-z
Cao, H., De Hosson, J. T. M., & Pei, Y. T. (2016). Effect of Argon Flow Rate on the Tribological Performance of Self-lubricating WS2/a-C Sputtered Coating. Poster session presented at Fifteenth International Conference on Reactive Sputter Deposition 2016, Gent, Belgium.
Shen, J. T., Pei, Y. T., & De Hosson, J. T. M. (2016). Formation of metal-F bonds during frictional sliding: Influence of water and applied load. Applied Surface Science, 368, 427-434. https://doi.org/10.1016/j.apsusc.2016.02.012
Detsi, E., Tolbert, S. H., Punzhin, S., & De Hosson, J. T. M. (2016). Metallic muscles and beyond: nanofoams at work. Journal of Materials Science, 51(1), 615-634. https://doi.org/10.1007/s10853-015-9317-1
Calderon, S., Ferreri, I., Henriques, M., De Hosson, J. T. M., Cavaleiro, A., & Carvalho, S. (2016). Nano-galvanic coupling for enhanced Ag+ release in ZrCN-Ag films: Antibacterial application. Surface & Coatings Technology, 298, 1-6. https://doi.org/10.1016/j.surfcoat.2016.04.019
van Bremen, R., Gomes, D. R., de Jeer, L. T. H., Ocelik, V., & De Hosson, J. T. M. (2016). On the optimum resolution of transmission-electron backscattered diffraction (t-EBSD). Ultramicroscopy, 160, 256-264. https://doi.org/10.1016/j.ultramic.2015.10.025
Zijlstra, G., Groen, M., Post, J., Ocelik, V., & de Hosson, J. T. M. (2016). On the role of the residual stress state in product manufacturing. Materials & design, 105, 375-380. https://doi.org/10.1016/j.matdes.2016.05.085
Mansilla , C., Novais, M. H., Faber, E., Martinez-Martinez, D., & De Hosson, J. T. (2016). On the 3D reconstruction of diatom frustules: a novel method, applications, and limitations. Journal of Applied Phycology, 28(2), 1097-1110. https://doi.org/10.1007/s10811-015-0653-y
Figueiredo, N. M., Vaz, F., Cunha, L., Pei, Y. T., De Hosson, J. T. M., & Cavaleiro, A. (2016). Optical and microstructural properties of Au alloyed Al-O sputter deposited coatings. Thin Solid Films, 598, 65-71. https://doi.org/10.1016/j.tsf.2015.11.060
Warneke, J., Rohdenburg, M., Zhang, Y., Orzagh, J., Vaz, A., Utke, I., De Hosson, J. T. M., van Dorp, W. F., & Swiderek, P. (2016). Role of NH3 in the Electron-Induced Reactions of Adsorbed and Solid Cisplatin. The Journal of Physical Chemistry. C: Nanomaterials and Interfaces, 120(7), 4112-4120. https://doi.org/10.1021/acs.jpcc.5b12184
Huráková, M., Csach, K., Miškuf, J., Juríková, A., Demčák, Š., Ocelík, V., & de Hosson, J. T. M. (2016). Serrated Plastic Flow of Various Metallic Glasses during Nanoindentation. Defect and Diffusion Forum, 368, 3-6. https://doi.org/10.4028/www.scientific.net/DDF.368.3
Dutka, M. V., Turkin, A. A., Vainchtein, D. I., Gersen, S., Van Essen, V. M., Visser, P., Mokhov, A. V., Levinsky, H. B., & De Hosson, J. T. M. (2016). Size distribution of silica nanoparticles: Its impact on green energy. Functional Nanostructures, 1(1), 1-12. https://doi.org/10.24274/fn.2016.a1
Rao, J. C., Ocelik, V., Vainchtein, D., Tang, Z., Liaw, P. K., & De Hosson, J. T. M. (2016). The fcc-bcc crystallographic orientation relationship in AlxCoCrFeNi high-entropy alloys. Materials Letters, 176, 29-32. https://doi.org/10.1016/j.matlet.2016.04.086
Shen, J. T., Pei, Y. T., & De Hosson, J. T. M. (2016). Wear and Failure Mechanism of PTFE/SiO2/Epoxy Composites. Journal of Tribology, 138(3), [031606].

2015

Fidder, H., Els-Botes, A., Woudberg, S., McGrath, P. J., Ocelik, V., & de Hosson, J. T. M. (2015). A study of microstructural fatigue and residual stress evolution in titanium plates deformed by mechanical and laser bending. 23-34. https://doi.org/10.2495/SECM150031
Faber, E. T., Martinez-Martinez, D., Mansilla, C., Ocelik, V., & De Hosson, J. T. M. (2015). Calibration-free quantitative surface topography reconstruction in scanning electron microscopy. Ultramicroscopy, 148, 31-41. https://doi.org/10.1016/j.ultramic.2014.08.009
Martinez Martinez, D., Ocelik, V., De Hosson, J. T. M., Mansilla Sanchez, C., & Faber, E. T. (2015). Determining quantitative three-dimensional surface topography from two-dimensional microscopy images. (Patent No. WO2015185538). https://worldwide.espacenet.com/publicationDetails/originalDocument?CC=WO&NR=2015185538A1&KC=A1&FT=D&ND=3&date=20151210&DB=&locale=en_EP
Hurakova, M., Csach, K., Miskuf, J., Jurikova, A., Demcak, S., Ocelik, V., & Hosson, de, J. (2015). Discontinuities of Plastic Deformation in Metallic Glasses with Different Glass Forming Ability. Physics Procedia, 75, 1265-1270. https://doi.org/10.1016/j.phpro.2015.12.140
Shen, J. T., Top, M., Van Rijn, F., Pei, Y. T., & De Hosson, J. TH. M. (2015). Effect of lubricants and sliding conditions on the tribo-performance of SiO2/epoxy composites. In J. T. M. De Hosson, M. Hadfield, & C. A. Brebbia (Eds.), Surface Effects and Contact Mechanics including Tribology XII 2015 (Vol. 91, pp. 199-209). (WIT Transactions on Engineering Sciences; Vol. 91). WIT Press. https://doi.org/10.2495/SECM150181
Shen, J. T., Top, M., Ivashenko, O., Rudolf, P., Pei, Y. T., & De Hosson, J. T. M. (2015). Effect of surface reactions on steel, Al2O3 and Si3N4counterparts on their tribological performance with polytetrafluoroethylene filled composites. Applied Surface Science, 331, 482-489. https://doi.org/10.1016/j.apsusc.2015.01.085
Song, G. M., De Hosson, J. T. M., Sloof, W. G., & Pei, Y. T. (2015). Evaluation of interface adhesion of hot-dipped zinc coating on TRIP steel with tensile testing and finite element calculation. In Surface Effects and Contact Mechanics including Tribology XII 2015: WIT Transactions (Vol. 91, pp. 3-14) https://doi.org/10.2495/SECM150011
de Jeer, L. T. H., Gomes, D. R., Nijholt, J. E., van Bremen, R., Ocelik, V., & De Hosson, J. T. M. (2015). Formation of Nanoporous Gold Studied by Transmission Electron Backscatter Diffraction. Microscopy and Microanalysis, 21(6), 1387-1397. https://doi.org/10.1017/S1431927615015329
Last modified:13 October 2015 3.46 p.m.