Publication

Development of an anaerobic digestion screening system using 3D-printed mini-bioreactors

Achinas, S. & Euverink, G-J., 16-Sep-2019, New Advances on Fermentation Processes. IntechOpen, 14 p.

Research output: Chapter in Book/Report/Conference proceedingChapterAcademicpeer-review

This study incorporated the concept of mini-bioreactors by employing additive manufacturing procedures. Limitations in experimental studies with large-scale equipment favor the use of mini-reactor systems and help to understand the phenomena of its large-scale counterpart better. 3D printing enables to reproduce the reaction engineering principles in a low-cost and ease of manufacture way and expedites the development of novel prototypes. Small anaerobic digesters of 40 mL were designed and fabricated to investigate the effect of downscaling on the stability and performance of the anaerobic digestion process. Baseline tests were conducted using a commercial 400-mL stirred bioreactor as reference for further comparison and validation. Miniature bioreactors showed similar stability and conversion efficiency. However, the biogas production rate and methane content of the 3D-printed bioreactors were lower than those in the baseline study bioreactors. Finally, 3D-printed systems were linked with efficient performances and are considered as an excellent opportunity for analyzing microbe-mediated bioenergy systems. This study demonstrated the high potential of miniaturized bioreactors as a process screening tool.
Original languageEnglish
Title of host publicationNew Advances on Fermentation Processes
PublisherIntechOpen
Number of pages14
Publication statusPublished - 16-Sep-2019

View graph of relations

Download statistics

No data available

ID: 99984345